Home > News > Content

Multi monitor hardware DIY Video Wall Controller Support scenes cycle broadcast function

Oct 29, 2016

Hardware Video wall controller key features:

1,  High-speed bus parallel processing technology, high-bandwidth uncompressed processing
3, Real time image display, no dropped frames
4,  Support display at arbitrary position, at any size and any superimposed
5,  Support open-window effects processing
6,  Support large-screen image freeze
7,  Support 7×24 uninterrupted and stable working
8,  Flexibility to increase the input/output board
9,  Support partial input and output cards with mixed interpolation
10,  Input/output card supports hot-swappable, plug-and-play functionality


Video and Image Processing :


1. Any Rectangular Video Wall Configuration can be supported. Screen order can be configured
2. Inputs/windows can be resized, layered and positioned across screen boundaries
3. Inputs/windows can be displayed in correct aspect ratio,stretched to fit,in full screen mode,or zoomed in to emphasize details
4. Input sources can be cropped to remove the edge pixels and lines
5. Dual-Link DVI Input (capture) cards support 4K ×4K resolution or a customizable resolution. Any source can be captured




Key functions:

Technical Specifications    

Model series    With CBD    No CBD    

Function description    4channel CBD,16channel AV, 12channel VGA/DVI input, 6U case supports 12 screens arrays, compatible with ultra-high resolution 4000/(8000)x2000 Dynamic background image    16channel AV,16channel VGA/ DVI input,6U case supports 16screens arrays    

Input signal(optional)    HDMI/DVI/VGA/AV/YPbPr    

Input resolution    1024x768~1080p,commonly used resolutions    

Output signal format    DVI/VGA/AV/YPbPr/HDMI(DVI-HDMI converter)    

Output resolution    Up to 1920×1200/60HZ    

System control software    Special control software    

Power Supply    Redundant power supply 110-220VAC, 50/60Hz    

Consumption    12W/channel    

Working temperature    -20°C——60°C    

Working Humidity    5-95%    

Case specification    4U/6U/10U/15U standard rackmount chassis    

Serial Control Interface    RS-232,9-pin female, Type-D    

Baud Rate    115200    

Pin configuration    2=TX,3=RX,5=GND    

Ethernet control interface    RJ-45 female, TCP/IP    

Ethernet control speed    Auto 10M or 100M,Full-duplex or half-duplex    

Working time    365×7×24hrs    

Technical specification of input/output connectors    

VGA/RGB input    Input: 15pin HD D-Sub, female    

Sync mode: HV independent sync    

Color Depth: 32bit/pixel    

Resolution: 640*480/60HZ—1920*1200/60HZ    

Input impedance :75Ω    

Video input    Input connector: BNC    

Detecting: full-format auto detecting    

Input impedance :75Ω    

VGA or DVI output    Resolution:1024*768/60HZ-1920*1200/60HZ    

Color depth: 32bit/pixel    

Output impedance:75Ω    

Physical properties of input/output connectors    

Signals    Connectors    Type    

Composite VIDEO input    BNC    female    

VGA input    15 pin HD D-Sub    female    

VGA output    15 pin HD D-Sub    female    

DVI output    24+5 or 24+1 standard    female    

AUX RS-232    9-pin D-Sub    female    

Main RS-232    9-pin D-Sub    female